62 11 280 Removing and installing instrument cluster (Countryman 2017-2020, except PHEV)

Attention! 

Comply with notes on protection against electrostatic damage (ESD PROTECTION ).

Preliminary work needed: 

• CLAMP OFF BATTERY LEAD FROM NEGATIVE CONNECTION POINT .

Removal: 

If necessary, lever out plugs (2) with a suitable tool (e.g. screwdriver Tx15).

Release screws behind.

Detach instrument cluster (1) in direction of steering wheel.

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect connector (1) and remove instrument cluster (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Connect connector (1) to instrument cluster (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Join instrument cluster (1).

Tighten the screws.

Tightening torque 62 11 1AZ .

If necessary, join plugs (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Connect BATTERY CABLE NEGATIVE TERMINAL .

For replacement: 

• PROGRAM/ENCODE .