Replacing guide sleeve for disengagement module (GS6-58BG) (Cooper Clubman base with FWD)

Preliminary work needed: 

• Remove TRANSMISSION .
• Remove CLUTCH RELEASE and release lever from guide tube.

Removal: 

Unscrew the screws (2).

Remove guide tube (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install guide tube (1).

Tighten down screws (2).

Tightening torque 23 11 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Position CLUTCH RELEASE and release lever on guide tube
• Install TRANSMISSION .