Removing and installing or replacing accelerator pedal module (Cooper)

Removal: 

Take off cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Release socket head cap screw (1).

Feed out accelerator pedal module (2) towards top.

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove accelerator pedal module.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Connect plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in the accelerator pedal module (1) from above.

Fit the hexagon socket-head bolt (2) and tighten. Tightening torque 35 40 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Insert cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.