72 12 Gas Generators, Airbag Module (Without Steering Wheel Airbag 3234)
72 12 GAS GENERATOR, UNIT FOR PASSENGER SIDE - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Passenger airbag module & support; to dashboard | R50/R53 | 10 Nm | ||
| R52 | 3.3 Nm | |||
| R55/R56/R57/R58/R59/R60/R61 | 9 Nm | |||
| 2AZ Self-locking nut for gas generator - ITS head airbag | R50/R53 | 6 Nm | ||
| 3AZ Holder for gas generator tube - ITS head airbag | R50/R53 | 3.5 Nm | ||
| 4AZ Fastening belt to A-and C-pillars - ITS head airbag | R50/R53 | 11 Nm | ||
| 5AZ Head airbag, mounting clip and trim panel to holder - B-pillar Holder, folding pack for head airbag and ramp, to body (B-pillar) |
R50/R53 | 6 Nm | ||
| R56/R55 | 8 Nm | |||
| 6AZ Side airbag (front seat) to backrest frame | R50/R52/R53 | Replace screw. | 6 Nm | |
| R55/R56/R57/R58/R59/R61 | Replace screw. | 6.5 ± 0.5 Nm | ||
| R60 | Replace screw. | 6.5 Nm | ||
| 7AZ Holder, front passenger airbag to dashboard | R50/R52/R53/R55/R56/R57/R58/R59/R60/R61 | 6 Nm | ||
| 8AZ Head airbag screw points | R60/R61 | 5 Nm | ||
| 9AZ Front passenger airbag holder to airbag module | R55/R56/R57/R58/R59/R60/R61 | 9 Nm | ||
| 10AZ Knee airbag to dashboard support | R60/R61 | 9 Nm | ||
72 12 TIGHTENING TORQUE OVERVIEW
| Side airbag on rear seat backrest | ||
|---|---|---|
| Nut | Tightening torque | 6.5 Nm |