Removing and installing/replacing rear center safety belt (Cooper)

Preliminary work needed:

Removal:

NOTE: Shown here without backrest cover and upholstery for a better overview

Shift backrest cover with upholstery upwards.

Release screw (1) on rear of backrest.

Remove seat belt retractor from backrest frame in upwards direction.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Electrically motorized reel is coded against incorrect installation.

Attach seat belt retractor to backrest frame.

Replace screw (1).

Tighten screw (1) on rear of backrest.

Tightening torque 72 11 20AZ.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: