Remove and install/replace the controller drive of the mixed air flap (left)

Preliminary work needed: 

• Remove left hand side center console TRIM PANEL

Removal: 

Unscrew the screws (1).

Unfasten plug connection (2) and disconnect.

Remove actuator drive (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position actuator drive (3) correctly.

Tighten down screws (1).

Join and lock plug connection (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Addressing can only be carried out with the diagnostic system: 

Service functions: 

• Body
• Heating/air conditioning function
• Flap motors
• Readdress flap motors

Required reworking: 

• Install left hand side center console TRIM PANEL .