Trim panel, instrument panel
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - TRIM PANEL, INSTRUMENT PANEL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Instrument panel trim to carrier support | F56/F55/F54/F57/F60 | Oval-head screw for plastic | 1.8 Nm | |
| Oval-head self-tapping screw | 2.4 Nm | |||
| 2AZ Support for dashboard on bulkhead (in engine compartment) | F56/F55/F54/F57/F60 | 21 Nm | ||
| 3AZ Retaining bracket to tunnel/support | F56/F55/F54/F57/F60 | 21 Nm | ||
| 4AZ Support for dashboard to A-pillar | F56/F55/F54/F57/F60 | 21 Nm | ||
| 5AZ Support for dashboard to cowl cross-member | F56/F55/F54/F57/F60 | 21 Nm | ||
| 6AZ Heating and air-conditioning unit on support | F56/F55/F54/F57/F60 | Replace screws | 8 Nm | |
| 7AZ Air duct on support | F60 | 2.4 Nm |