Tightening torque overview
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - TIGHTENING TORQUE OVERVIEW
| Air duct to deformation element/cross connection | ||
| M6x20 screw | Tightening torque | 6 Nm |
| Battery cover to bulkhead | ||
| Cap nut | Tightening torque | 3 Nm |
| Battery cover to tension strut/trim panel | ||
| 2.8 Nm | ||
| Brake ventilation duct to holder | ||
| screw | Tightening torque | 4 Nm |
| Bumper cover to front panel | ||
| M6x20 screw | Tightening torque | 6 Nm |
| Lower front bumper panel | ||
| screw | Tightening torque | 3 Nm |
| Second bulkhead | ||
| screw | Tightening torque | 5 Nm |
| Tension strut to battery tray | ||
| M8 | 19 Nm | |
| Wheel arch cover | ||
| screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Wheel arch trim panel to bumper panel | ||
| screw | 2.5 Nm | |
| Wiring harness holder to second bulkhead | ||
| screw | Tightening torque | 1.5 Nm |