61 71 100 Removing and installing/replacing windshield washer pump

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Before replacing the windshield washer pump, check the washer fluid reservoir for dirt contamination and clean if necessary!

Preliminary work needed:

Partially release FRONT RIGHT FRONT WHEEL ARCH COVER

Removal:

NOTE: Catch any leakage washer fluid if necessary.

Unlock and disconnect the connector (1).

Unlock hose pipes and disconnect from windshield washer pump (2).

Pull windshield washer pump (2) upwards out of washer fluid reservoir for washer system.

Fig 1: Pulling Windshield Washer Pump

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, remove sealing ring with strainer (3) from washer fluid reservoir and windshield washer pump (2).

Installation:

NOTE: Replace sealing ring with strainer (3).
Coat sealing ring (3) with lubricant.
Ensure hose pipes are laid without kinks.

Feed in windshield washer pump (2) into washer fluid reservoir for washer system.

Connect hose pipes to windshield washer pump (2).

Connect the connector (1).

Fig 2: Pulling Windshield Washer Pump

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, top up washer fluid reservoir.