61 31 134 Removing and installing/replacing USB audio interface connecting socket

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 325

Removal:

Unclip cover (1) from trim panel (2) with special tool 00 9 325 .

Unlock and disconnect connector behind.

Fig 1: Unclipping Cover From Trim Panel With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Release detent on both sides while at the same time pressing connecting socket (1) out of cover (2).

Fig 2: Releasing Detent On Both Sides

Courtesy of BMW OF NORTH AMERICA, INC.

Join connecting socket (1) in cover (2).

NOTE: Ensure connecting socket (1) engages correctly in cover (2).

Fig 3: Releasing Detent On Both Sides

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Clamps on trim (1) must not be damaged or missing.

Connect associated connector.

Clip in cover (1) into trim panel (2).

Fig 4: Clipping Cover Into Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.