61 62 100 Adjusting the spray nozzle for rear window washer system
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Rear wiper must be in rest position.
Mark the contact point (1) with adhesive tape (A=55 mm/B=490 mm).
Operate the rear window washer system.
The spray jet must hit the mark.
If necessary, adjust the spray nozzle (3).
IMPORTANT:
Do not insert pointy objects into the spray nozzle (3) (risk of damage).
Open protective cap (2).
Use a suitable tool to adjust the spray nozzle (3) until the spray jet hits the mark.
If applicable, remove adhesive residue from the rear window.
Fill up with washer fluid.