61 12 001 Replacing positive battery cable (from battery to front power distribution box)
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Observe SAFETY INSTRUCTIONS for handling vehicle battery.
Preliminary work needed:
- Remove BATTERY
Removal:
Release upper housing section (1) from lower housing section in arrow direction and remove.
Release nut (1) and remove positive terminal cable (2) of power distribution box positive battery cable.
Release nut (1) and remove positive terminal cable (2) of battery terminal positive terminal (3).
Installation:
Join positive terminal cable (2) to battery terminal positive terminal (3) and tighten nut (1).
Tightening torque 61 21 3AZ .
Tighten positive terminal cable (2) to power distribution box positive battery cable with nut (1).
Tightening torque 61 21 3AZ .
NOTE:
Risk of short circuits!
Make sure flat positive terminal wire (2) is correctly seated.
NOTE:
Retaining lugs on upper housing section (1) must not be damaged or missing.
Join upper housing section (1) to lower housing section in arrow direction.
NOTE:
Ensure upper housing section engages correctly (1) engages correctly in lower housing section.