Opening brazed connections
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
The "Bonding and Riveting" repair method involves replacing the watertight brazed connection with adhesive.
This gives rise to a new procedure for opening brazed connections.
Grind brazed seam with a belt grinder. This keeps the influence of heat in the area around the brazed seam as small as possible.
IMPORTANT:
Never use a gas flame.
All traces of brazing solder do not have to be removed.
Do not grind body panels thin.