LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine - Special Tools - B36 & B38 Engines -- Cooper, F55 & F56) >> Engine >> 212050 Tool Minimum set: Mechanical tools AM >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

01 27 03 (050)

Consisting of:

1 = 0494788 Bush

NOTE: For pressing the roller bearing out of the dual-mass flywheel.
Fig 1: Identifying Tool Minimum Set - Mechanical Tools AM (212050)
G09966175Courtesy of BMW OF NORTH AMERICA, INC.

2 = 0494789 Mandrel

NOTE: For pressing the roller bearing into the dual-mass flywheel. Liquidation of existing inventory and then available only as a complete tool set 212050=8330 0494762 - as of 28.02.2012
scientia non olet · About LEMON Manuals