LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Engine - Special Tools - B36 & B38 Engines -- Cooper, F55 & F56) >> Engine >> 119260 Holder Minimum set: Mechanical tools AM >> SI number

SI number

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

01 01 01 (662)

Consisting of:

Fig 1: Holder Minimum Set - Mechanical Tools AM (119260)
G04739157Courtesy of BMW OF NORTH AMERICA, INC.

1 = 0494034

Holder

NOTE: (Individual counter support)

2 = 0494035

Screw

NOTE: (Bolt (thread M10) with washer) For screwing counter support

3 = 0494129

Bush

NOTE: (Bush for counter support) For counter support, for retaining flywheel when gearbox is removed Engine: N62, N73

4 = 0494130

Screw

NOTE: (Bolt (thread M12)) For counter support for retaining flywheel when gearbox is removed

5 = 0494793

Bush

6 = 0495216

Bush

NOTE: For counter support, for retaining flywheel when gearbox is removed Engine: M57TU2
scientia non olet · About LEMON Manuals