12 41 041 Replacing the engagement solenoid switch

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Switch off ignition.
Remove STARTER MOTOR .

Slacken nut (1).

Remove the cable shoe (2).

Fig 1: Cable Shoe And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Attention!

Do not twist the cable shoe (2) when tightening, risk of shorting to starter motor housing.

Tightening torque 12 41 1AZ .

Release screws (1).

Fig 2: Starter Motor Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove the solenoid switch (1) and the spring (2).

Detach the bolt (3).

Installation note:

Check the bolt (3) for wear and grease the bolt.

Fig 3: Solenoid Switch, Spring And Bolt

Courtesy of BMW OF NORTH AMERICA, INC.