23 11 618 Replacing guide sleeve for clutch operator (GS6-58BG)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRANSMISSION
Remove clutch operator and release lever from guide tube.

Removal:

Unfasten screws (2).

Remove guide tube (1).

Fig 1: Locating Guide Tube And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install guide tube (1).

Tighten down screws (2).

Tightening torque 23 11 1AZ .

NOTE: Clean new guide tube.

Guide surface must be clean (no labels/stickers or adhesive residue, etc.).

Fig 2: Locating Guide Tube And Screws

Courtesy of BMW OF NORTH AMERICA, INC.