LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Restraints - Tightening Torques (F56)) >> Airbags >> 72 12 Gas generator, unit for passenger's side

72 12 Gas generator, unit for passenger's side

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
  Type Thread Tightening specifications Dimension
1AZ Passenger airbag module - to instrument panel carrier R50 / R53     10 Nm
  R52     3.3 Nm
- to dashboard R55 / R56 / R57 / R58 / R59 / R60 / R61     9 Nm
2AZ Self-locking nut for gas generator - ITS head airbag R50 / R53     6 Nm
3AZ Bracket for gas generator tube - ITS head airbag R50 / R53     3.5 Nm
4AZ Fastening belt to A-and C-pillars - ITS head airbag R50 / R53     11 Nm
5AZ Head airbag, retaining clip and panel to bracket - B-pillar
Bracket, folding pack for head airbag and ramp, to body (B-pillar)
R50 / R53     6 Nm
  R56 / R55     8 Nm
6AZ Side airbag (front seat) to backrest frame R50 / R52 / R53   Replace screw. 6 Nm
  R55 / R56 / R57 / R58 / R59 / R61   Replace screw. 6.5 ±0.5 Nm
  R60   Replace nut. 6.5 Nm
7AZ Holder, front passenger airbag to instrument panel carrier R50 / R52 / R53 / R55 / R56 / R57 / R58 / R59 / R60 / R61     6 Nm
8AZ Head airbag screw points R60 / R61     5 Nm
9AZ Front passenger airbag holder to airbag module R55 / R56 / R57 / R58 / R59 / R60 / R61     9 Nm
10AZ Knee airbag to dashboard support R60 / R61     9 Nm