31 35 005 Removing and installing anti-roll bar link for left or right anti-roll bar

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT WHEEL .

Removal:

Release nuts (1); if necessary, grip at inner Torx socket.

Remove anti-roll bar link (2).

Fig 1: Anti-Roll Bar Link And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fig 2: Anti-Roll Bar Link And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Insert anti-roll bar link (2) on anti-roll bar and spring strut.

Part: Replace nuts (1).

Tighten nuts (1), if required counter support at Torx socket.

Tightening torque 31 35 1/2AZ .

Required follow-up work:

Install FRONT WHEEL .