11 62 Exhaust manifold
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust manifold with exhaust turbocharger to cylinder head | B38M0/U0 / B36M0 | M7 | Observe screwing sequence (refer to procedure for REMOVING/INSTALLING/REPLACING TURBOCHARGER
) (5 passages necessary) |
|
| 1. Joining torque | 10 Nm | |||
| 2. Joining torque | 10 Nm | |||
| 3. Joining torque | 16 Nm | |||
| 4. Joining torque | 16 Nm | |||
| 5. Joining torque | 16 Nm | |||
| 2AZ Trim strip at the cylinder head | 38M0/U0 / B36M0 | M7 | ||
| 1. Join | 10 Nm | |||
| 2. Join | 16 Nm | |||
| 5. Final torque | 16 Nm | |||