31 12 Wishbone
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wishbone to swivel bearing | F54 / F55 / F56 / F57 / F60 | M10 | Exclusively use the screw to tighten! Renew screw and nut. |
60 Nm |
| 2AZ Wishbone to front axle support | F54 / F55 / F56 / F57 / F60 | M12 | Tighten in normal position! Renew screw. |
|
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 3AZ Holder, wishbone rubber mount, to front axle support | F54 / F55 / F56 / F57 / F60 | M12 | Observe installation position of the screws - different lengths! | 100 Nm |
| 4AZ Holder, wishbone rubber mount, to body | F54 / F55 / F56 / F57 / F60 | M10 | Renew screws. | |
| Jointing torque | 56 Nm | |||
| Angle of rotation | 90° |