LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Brakes - Repair (F55, F56)) >> Safety And General Information >> 34 00 010 Checking thickness of brake pad

34 00 010 Checking thickness of brake pad

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: The thickness of the outer brake pads can be determined without removing the wheels.
If necessary, move vehicle until opening for brake pad wear indicator (brake pad) can be seen through rim styling.

Insert special tool 34 1 260 wheel rim into opening for brake pad wear indicator.

Press special tool onto brake pad. Slide ring (1) in direction of arrow up to stop and read off measured value.

Fig 1: Inserting Special Tool Wheel Rim Into Opening For Brake Pad Wear Indicator
G04726560Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
  1. Brake disc
  2. Brake pad with backplate:

    Remaining brake PAD THICKNESS of front brake.

    Remaining brake PAD THICKNESS of rear brake.