34 21 280 Removing and installing/replacing rear left protective plate
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR BRAKE DISC .
Removal:
Release screws (1) and remove brake guard plate (2).
Installation:
Mounting the brake guard plate (2).
Insert screws (1) and tighten.
Tightening torque 34 21 4AZ .