34 52 525 Replacing one front pulse sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front WHEEL .
Partially detach front WHEEL ARCH PANEL .

Removal:

Release screw (1) and remove pulse sensor (2).

Remove cable from bracket on spring strut.

Fig 1: Locating Front Pulse Sensor Screw

G11648533

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage cable from holders (1).

Disconnect plug connection (2).

Fig 2: Locating Plug Connection For Front Pulse Sensor

G11648004

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clean bore hole for pulse sensor and grease with Staburags NBU 12/K lubricating grease.

IMPORTANT: Check sensor head prior to installation for damage, replacing if necessary.

Fig 3: Front Pulse Sensor Head

G04797051

Courtesy of BMW OF NORTH AMERICA, INC.

Attach brake pad wear sensor in brackets (1).

Connect plug connection (2).

Fig 4: Locating Plug Connection For Front Pulse Sensor

G11648004

Courtesy of BMW OF NORTH AMERICA, INC.

Install pulse sensor (2).

Insert screw (1) and tighten down.

Tightening torque 34 51 4AZ .

Install cable in bracket on spring strut.

Fig 5: Locating Front Pulse Sensor Screw

G11648533

Courtesy of BMW OF NORTH AMERICA, INC.