32 00 Wheel Alignment

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT SPECIFICATION

Observe test conditions

Front axle:

Total toe-in

0° 12' ±12'

Adjustment⁽¹⁾ total toe-in

0° 12' ±4'

Toe difference⁽²⁾ single wheel between left/ right

max. 12'

Camber (difference between left/ right max. 30')

- 30' ± 30'

Adjustment⁽¹⁾ camber

- 30' ± 25'

Toe difference angle

(difference between left/right max. 30')

with inner cornering wheel at 20° steering angle

-1° 19' ±30'

Caster

(difference between left/right max. 30')

Front wheel offset

0° 15'

Maximum steering angle

Inner cornering wheel

ca. °

37° 00'

Outer cornering wheel

ca. °

31° 06'

Rear axle:

Total toe-in

0° 18' ± 12'

Adjustment⁽¹⁾ total toe-in 53 of 58

0° 18' ± 4'

Camber:
Camber (difference between left/right max. 30')

-1° 45' ± 25'

Adjustment⁽¹⁾ camber

-1° 45' ± 5'

Geometrical driving axis

0° ± 12'

NOTE:

⁽¹⁾	To minimize adjusting errors (measuring inaccuracies), use a narrower tolerance for the toe/camber setting.

NOTE:

⁽²⁾	Toe difference angle front axle = criterion for steering wheel inclination