32 00... Shifting vehicle into normal position

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Check compliance with TEST CONDITIONS , repair vehicle if necessary.

Check vehicle interior and trunk (including spare wheel well) for load status, if applicable, unload car

Introduce DIN load into vehicle.

Vehicle fully assembled for normal operation with: 2 x 68 kg on front seats (seats in central position), 1 x 14 kg in trunk (center) and full fuel tank.

Determine VEHICLE RIDE HEIGHT .

NOTE: If the vehicle ride height is not inside the tolerance (refer to TECHNICAL DATA ), the vehicle must be repaired (coil spring/leakage).