65 75 055 Removing and installation/replacing emergency power siren with tilt sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Partially detach REAR RIGHT wheel arch cover.

Removal:

Unscrew nuts (1).

Fig 1: Locating Emergency Power Siren Removing Screws

G11650314

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove emergency power siren with tilt sensor (2).

Fig 2: Removing Emergency Power Siren With Tilt Sensor

G11650315

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Slacken nut (1).

Remove emergency power siren with tilt sensor (2) from holder (3).

Fig 3: Emergency Power Siren Parts Location

G11650316

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Place the emergency power siren with tilt sensor (2) correctly on holder (3).

Tighten nut (1).

Fig 4: Emergency Power Siren With Tilt Sensor

G11650316

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Join and lock the plug connection (1) on the emergency power siren including the tilt sensor (2).

Fig 5: Locating Emergency Power Siren Plug Connections

G11650315

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down nuts (1).

Fig 6: Locating Emergency Power Siren Tightening Screws

G11650319

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING AND ENCODING .