65 77 016 Removing and installing/replacing airbag control unit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe all applicable SAFETY INFORMATION pertaining to airbag.

Incorrect handling can activate airbag and cause injury.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Disconnect BATTERY EARTH LEAD

Remove CENTER CONSOLE .

Removal:

Detach cable clip (1).

Release nut (2) and screw (3).

Take off holder (4).

Fig 1: Locating Airbag Control Unit Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Unlock plug connections (2) and disconnect.

Remove airbag control unit (3).

Fig 2: Locating Airbag Control Unit Plug Connections And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Position airbag control unit (3).

Tighten down nuts (1).

Join and lock plug connections (2).

Fig 3: Locating Airbag Control Unit Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Position holder (4).

Tighten nut (2) and bolt (3).

Attach cable clip (1).

Fig 4: Locating Nut And Bolts Of Airbag Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Run the service function to adjust the sensors for the driving dynamics as follows:

Chassis and suspension
Traction control system
Adjustment of the driving dynamics sensors

Replacement:

Carry out VEHICLE PROGRAMMING AND ENCODING .