16 12 010 Removing and installing/replacing carbon canister (US version with NVLD)

WARNING: This page is about a different car, the 2017 MINI Cooper, 2016 MINI Cooper, 2015 MINI Cooper, and 2014 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove UNDERBODY PANELLING at rear left.

Removal:

Unlock and detach quick-connect couplings (1).

Release plastic nuts (2) and remove carbon canister (3).

Fig 1: Carbon Canister, Quick-Connect Couplings And Plastic Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit carbon canister (3) and position and tighten plastic nuts (2).

Position snap fasteners (1) and lock.

Fig 2: Carbon Canister, Quick-Connect Couplings And Plastic Nuts

Courtesy of BMW OF NORTH AMERICA, INC.