16 14 500 Removing and installing/replacing control unit for electric fuel pump

WARNING: This page is about a different car, the 2017 MINI Cooper, 2016 MINI Cooper, 2015 MINI Cooper, and 2014 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Attention !

Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove REAR SEAT BENCH .

Removal:

Disconnect plug connection (1).

Release nuts (2) and remove control unit (3).

Fig 1: Control Unit, Plug Connection And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install control unit (3).

Insert nuts (2) and tighten.

Tightening torque 16 14 1AZ .

Position plug connection (1) and lock.

Fig 2: Control Unit, Plug Connection And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.