66 53 010 Calibrating reversing camera

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Calibration of reversing camera must be carried out after the following work:

Replace the RFK
Repair work on the rear area of the body
Adjusting work at tailgate

Attention !

Follow instructions and specifications in procedure.

To obtain an optimum result, always adhere to the following conditions:

Vehicle standing level on headlight aiming station
Rear seat bench is unoccupied
Do not swap seats during calibration
Steering wheel in straight-ahead position
Do not move steering wheel

NOTE: Also switch on reversing camera by means of PDC button.
Calibration can only be carried out with the diagnosis system.

Equipment specification with rear view camera:

Carry out the service function:

Driver assistance
Rear view camera
Calibration of the reversing camera

Equipment specification with all-round vision camera:

Carry out the service function:

Driver assistance

All-round vision camera

Calibration and teaching in for all-round vision camera

Using a special tool is no longer required for vehicles with a production date from 03/2011!