Wishbone/trailing arm and struts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Upper wishbone to trailing arm | F54 / F55 / F56 / F57 / F60 | M12 | Renew nut. | 100 Nm |
| 2AZ Lower wishbone to trailing arm | F54 / F55 / F56 / F57 / F60 | M12 | Renew screw and nut. Tighten in normal position. |
100 Nm |
| 3AZ Wishbone to rear axle support | F54 / F55 / F56 / F57 / F60 | M12 | Renew nut. Tighten down in normal position. |
100 Nm |
| 4AZ Trailing arm bearing support to trailing arm | F54 / F55 / F56 / F57 / F60 | M12 | Renew nut. Tighten in normal position. |
100 Nm |
| 5AZ Trailing arm bearing support to body | F54 / F55 / F56 / F57 / F60 | M12 | Renew screw. | 100 Nm |
| 6AZ Cover to trailing arm | F54 / F55 / F56 / F57 / F60 | 3 Nm |