64 11 841 Replacing actuator drive for right footwell flap

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove RIGHT GLOVE BOX

Removal:

Disengage and remove air duct (1) on heating and air-conditioning unit.

Fig 1: Air Duct Of Heating And Air-Conditioning Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Unfasten screws (2).

Remove actuator drive (3).

Fig 2: Actuator Drive, Plug Connection, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Position actuator drive (3) correctly.

Tighten down screws (2).

Join and lock plug connection (1).

Fig 3: Actuator Drive, Plug Connection, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Position air duct (1) correctly and engage at heating and air-conditioning unit.

NOTE: Ensure the air duct (1) is fitted correctly and securely.

Fig 4: Air Duct Of Heating And Air-Conditioning Unit

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Servomotors must be readdressed in the event of replacement!

Addressing can only be carried out with the BMW diagnosis system.

Service functions:

Body
Heating/air conditioning function
Flap motors
Readdress flap motors