LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Heating And Air Conditioning - Repair (F55, F56)) >> HVAC Unit, Control Panel, Blowers, HVAC Sensors, Blending Flap Actuator >> 64 11 380 Removing and installing/replacing control unit for air conditioning

64 11 380 Removing and installing/replacing control unit for air conditioning

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Removal: 

NOTE: The control unit for the heating and air conditioning system is located in the footwell on the left next to the heating and air-conditioning unit.

Unlock and detach plug connections (1 and 2).

Unlock latch mechanism (3) downward.

Pull out control unit (4) in direction of arrow and remove.

Fig 1: Removing Control Unit For Air Conditioning
G11147189Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out PROGRAMMING/ENCODING .

Installation: 

NOTE: Make sure control unit (1) is correctly fitted.

Lock control unit (1).

Join and lock plug connections (2).

Fig 2: Control Unit Plug Connections
G11650151Courtesy of BMW OF NORTH AMERICA, INC.