LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2019 >> Cooper Clubman S ALL4, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Heating And Air Conditioning - Repair (F55, F56)) >> HVAC Unit, Control Panel, Blowers, HVAC Sensors, Blending Flap Actuator >> 64 11 225 Replacing controller for heating and air conditioning system blower

64 11 225 Replacing controller for heating and air conditioning system blower

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Removal: 

NOTE: The controller for the blower is located in the footwell on the left behind the heating and air-conditioning unit.

On version with air duct: 

Release screws (1).

Feed out air duct (2).

Fig 1: Locating Air Duct Screws
G11650143Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Unlock plug connections (2) and disconnect.

Remove controller (3).

Fig 2: Controller, Plug Connections, And Screws
G11149034Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position controller (3) correctly.

Tighten down screws (1).

Join and lock plug connections (2).

Fig 3: Controller, Plug Connections, And Screws
G11149034Courtesy of BMW OF NORTH AMERICA, INC.

On version with air duct: 

Feed in air duct (2).

Tighten down screws (1).

Fig 4: Locating Air Duct Screws
G11650143Courtesy of BMW OF NORTH AMERICA, INC.