1111 Engine Block
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
B36 ENGINE (COOPER BASE):
TIGHTENING TORQUE SPECIFICATION (ENGINE BLOCK)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Crankshaft bearing cap to crankcase (collar screw) | B32S15M0/B38M0/U0/B36M0 | M10X1.5 Replace screws and screw in hand-tight. |
1. Joining torque 2. Angle of rotation 3. Angle of rotation |
25 Nm 60° 60° |
| 2AZ Oil spray nozzle in crankcase | B32S15M0/B38M0/U0/B36M0 | M6 | 8 Nm | |
| 3AZ Bearing journal of tensioning and guide rail | B32S15M0/B38M0/U0/B36M0 | M8 | Replace bolt. | 20 Nm |
| 4AZ Camshaft wheel with ball bearing to crankcase | B32S15M0/B38M0/U0/B36M0 | M12x1.5 | 108 Nm | |
| 5AZ Special tool/holder to crankcase | B32S15M0/B38M0/U0/B36M0 | M 10x35 | 40 Nm | |
| 6AZ Special tool 11 8 930 to special tool 00 2 300 | B32S15M0/B38M0/U0/B36M0 | M 14x35 | 160 Nm | |
| 7AZ Chain tensioner to crankcase | B32S15M0/B38M0/U0/B36M0 | M6x22 | 10 Nm | |
| 8AZ Spacing screw for acoustic cover on engine block (Key range 17) | B32S15M0/B38M0/U0/B36M0 | M8x12 | 12 Nm |
B46 AND B48 ENGINES (COOPER S AND JCW):
11 11 ENGINE BLOCK - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (collar screw 11.9) | B42S2000/B46M0/O0/B48M0/O0 | M10x1.5 Replace screws and screw in hand-tight. |
1. Joining torque 2. Angle of rotation 3. Angle of rotation |
25 Nm 60° 60° |
| 2AZ Oil spray nozzle in crankcase | B42S2000/B46M0/O0/B48M0/O0 | M6 | 8 Nm | |
| 3AZ Bearing journal of tensioning and guide rail | B42S2000/B46M0/O0/B48M0/O0 | M8 | Replace bolt. | 20 Nm |
| 4AZ Camshaft wheel with ball bearing to crankcase | B42S2000/B46M0/O0/B48M0/O0 | M12x1.5 | 108 Nm | |
| 5AZ Special tool/holder to crankcase | B42S2000/B46M0/O0/B48M0/O0 | M10x35 | 40 Nm | |
| 6AZ Special tool 11 8 930 to special tool 00 2 300 | B42S2000/B46M0/O0/B48M0/O0 | M14x35 | 160 Nm | |
| 7AZ Chain tensioner to crankcase | B42S2000/B46M0/O0/B48M0/O0 | M6x22 | 10 Nm | |
| 8AZ Spacing screw for acoustic cover on engine block (Key range 17) | B42S2000/B46M0/O0/B48M0/O0 | M8x12 | 12 Nm |
| Special tool 11 8 930 to special tool 00 2 320 | |
| M 14x35 | 160 Nm |