Removing and installing/replacing trim for Head-Up Display (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 325

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Removal:

Release cover for head-up display (1) from retaining clips with special tool 00 9 325.

Feed out cover for head-up display (1) from instrument panel trim (2) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Retaining clips an cover for head-up display (1) must not be missing or damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Join cover for head-up display (1) to instrument panel trim (2) and clip in.

NOTE: Ensure cover for head-up display (1) is correctly fitted and engaged on instrument panel trim (2).

Courtesy of BMW OF NORTH AMERICA, INC.