65 75 055 Removing and installation/replacing emergency horn with tilt sensor (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Partially detach rear right WHEEL ARCH COVER.

Removal:

Unscrew nuts (1).

G11650319

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove emergency horn with tilt alarm sensor (2).

G11650315

Courtesy of BMW OF NORTH AMERICA, INC.

For replacement:

Slacken nut (1).

Remove emergency horn with tilt sensor (2) from holder (3).

G11650316

Courtesy of BMW OF NORTH AMERICA, INC.

For replacement:

Place the emergency horn with tilt sensor (2) correctly on holder (3).

Tighten nut (1).

G11650316

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Join and lock the plug connection (1) on the emergency horn including the tilt sensor (2).

G11650315

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down nuts (1).

G11650319

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install rear right WHEEL ARCH COVER .