Replacing guide sleeve for disengagement module (GS6-58BG) (Cooper base)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove TRANSMISSION .
Remove CLUTCH RELEASE and release lever from guide tube.

Removal:

Unscrew the screws (2).

Remove guide tube (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install guide tube (1).

Tighten down screws (2).

Tightening torque 23 11 1AZ .

NOTE: Clean new guide tube.
Guide surface must be clean (no labels/stickers or adhesive residue, etc.).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Position CLUTCH RELEASE and release lever on guide tube
Install TRANSMISSION .