REP-TAT-P-5434-02 Installing the seal on the convertible top brace
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Follow-up work
- Close the LOADING AID
- Align the seal (1) using the attachment points.
- Clip in the seal (1) at the convertible top brace across the entire length.
- Clip the seal (1) into the convertible top brace on the left and right.
The seal (1) must be flush with the convertible to brace (2).
- Tighten screws (1) left and right.
TIGHTENING TORQUE SPECIFICATION
| Trim strip to convertible top |
| 2.5 Nm |