REP-TAT-P-5434-02 Installing the safety catch

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Follow-up work

Install the INTERIOR TRIM of the guide rail

Insert the centering tip (2) pointing towards the bottom.
Insert the sleeve (1) into the centering tip (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the centering pin (2).
Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATION

Centering tip

4 Nm

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATION

Safety catch to frame

1.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.