REP-TAT-P-5434-02 Installing the seal on the roof frame at the rear

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Shift the convertible top into the shown position.
Guide the seal (1) in with the guides (2).
Insert the seal (1) completely in the convertible top and align it.

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten the screws (1) inside the seal (2).
TIGHTENING TORQUE SPECIFICATION

Seal on the rear roof frame

2.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.
Close soft top.
Check the alignment of the seal (1) to the seal (2).

The gasket (1) must have contact pressure with the gasket (2).

Courtesy of BMW OF NORTH AMERICA, INC.