REP-TAT-P-5434-02 Install the seal of the roof frame

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Adjust the seal of the roof frame

Coat the seal (1) with mounting agent.

Courtesy of BMW OF NORTH AMERICA, INC.
Place the end piece of the seal (1) onto the front roof frame (2) and secure it approximately 5 cm toward the back.
Place the end piece of the seal (1) onto the rear roof frame (2) and secure it approximately 5 cm toward the front.

Courtesy of BMW OF NORTH AMERICA, INC.
Apply light pressure to engage the upper section (1), pressing it from the right and the left into the center.
Apply light pressure to engage the lower section (1), pressing it from the right and the left into the center.
Check gasket for correct fit.

Courtesy of BMW OF NORTH AMERICA, INC.