REP-TAT-P-5434-02 Install the gasket in front
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Follow-up work
- Install/adjust the SEAL of the roof frame
- Install the TRIM PANEL for the guide rail
- Coat the seal (1) with mounting agent.
- Place the end piece of the seal (1) onto the joint at the back of the frame (2) and secure it approximately 5 cm toward the front.
- Place the end piece of the seal (1) onto the joint at the front of the frame (2) and secure it approximately 5 cm toward the back.
- First, apply slight pressure from the right and left toward the center to latch the top and then the bottom section (1).
- Check gasket for correct fit.