REP-TAT-P-5434-02 Installing the base plate
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: GAP DIMENSIONS, BODY
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: GAP DIMENSIONS, BODY
- Position the base plate (2).
- Tighten the screws (1) hand force.
- Close soft top.
- Check the gap dimensions and if necessary, align the convertible top.
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATION
| Base plate to body |
| 7.6 Nm |