REP-TAT-P-5434-02 Installing the trim strip on the convertible top
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Follow-up work
- Close LOADING AID
Prerequisite
The convertible top is completely closed.
- Position the trim strip (1) and align with the side of the trim strip (2).TECHNICAL DATA DESCRIPTION
Gap dimension, trim strip, convertible top 4 mm... 5 mm - Secure the trim strip (1) with the screws (3).
The screws (3) are longer than the rest of the screws of the trim strip (1).
- The trim strip (1) must be flush with the trim strip of the side window glass.
If necessary, shift the wedge (2) to adjust the trim strip (1).
- Tighten the long screws (1) and short screws (2) the trim strip (3).
TIGHTENING TORQUE SPECIFICATION
| Trim strip to convertible top |
| 2.5 Nm |