REP-TAT-P-5434-01 Removing the stowage locks
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Prerequisite
Soft top completely open.
- Disconnect the plug connection (1) from the hall effect sensor.
- Unclip cable from body.
- Loosen the screw (1) and remove the cover.
- Left side only:
Carefully lift the cover (1).
Detach the hall effect sensor (2) from the recess (3) of the cover (1).
- Open the convertible top locking (1) at the stowage lock (2).
- Shift soft top a little in the "close" direction.
- Loosen screws (1).
- Carefully lift the convertible top (2) and remove the stowage lock (3) towards the rear.