Removing and installing/replacing front left or right auxiliary turn signal lamps (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 325
WARNING:
Follow instructions for handling LIGHT BULBS (EXTERIOR LIGHTING) .
Removal:
Raise the hood.
Release detent of auxiliary turn signal lamp (1) at rear of side panel with special tool 00 9 325.
Remove auxiliary turn signal lamp (2) from side panel.
Unlock and disconnect associated connector.
Installation:
NOTE:
Guides and clamp on auxiliary turn signal lamp (1) must not be missing or damaged.
Connect associated connector.
Position auxiliary turn signal lamp (1) at side panel (2) and engage.