US version: Check/set horizon blocking after adjusting the headlight (Cooper Convertible)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools Required:
- 2 467 369
NOTE:
Before installing the new headlight, ensure that the adjustment screw for the horizontal adjustment of the headlight is protected with a plug from being manipulated.
Special tool 2 467 369 has a freewheel for fitting the horizontal lock without damaging it or applying any torque (special tool availability temporarily delayed until Q1 2019)
Carefully insert the plug (1) for blocking the horizontal adjustment on the special tool 2 467 369 without damaging it.
Push the plug (1) with the special tool 2 467 369 into the adjustment screw for horizontal adjustment (2) without damaging it (schematic illustration).