3341 Wheel Bearings
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION (WHEEL BEARINGS)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel bearing to trailing arm | F54/F55/F56/F57/F60 | M12 | Joining torque and angle of rotation must be observed without fail. Replace screws. |
|
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Wheel bearing (hub) on output shaft | F54 ALL/F60 ALL | M16 | Joining torque and angle of rotation must be observed without fail. Replace screw. |
|
| Joining torque | 210 Nm | |||
| Angle of rotation | 90° |